In an age of inconspicuous consumption, where more and more electronic installations are being concealed in cabinets or cupboards, heat has become a major factor. Heat is the enemy of all electronic components and is a major contributor to poor reliability. Housed in a rack-mountable chassis, Sherbourn’s innovative C12 cooling unit is designed to permit multiple configurations for pointing the cool air emanating from its three thermally governed fans into any direction including the outside—you make the decision based upon your needs. The C12 has a low voltage trigger, a built-in thermal and/or pigtail sensor, a minimum temperature activation switch and a synch switch in case you want two fans.
No other fan system offers the flexibility of Sherbourn’s, with its ability to move over one hundred cubic feet of air per minute in a whisper-quiet and efficient manner.
Features
Housed in a 2" high rack-mountable chassis
Contains three whisper-quiet 4.75 inch fans
Features an embedded thermal sensor
Front panel has a master power switch and blue LED lights
Front panel contains an air filter to filter incoming air should a front intake be operational
Rear panel has a 12 volt trigger, a two-position switch for setting the minimum starting temperature switch, a synch switch should a particular installation require two fans, an input to accept the pig tail thermal sensor and two exhaust ports
Minimum temperature start switch can be set to either 95 or 194 degrees Fahrenheit
Includes a magnetic pig tail thermal sensor for use when one wants to measure the temperature at the “hot spot” of the installation.When used, this sensor will over-ride the one embedded in the chassis
Can be mechanically configured to allow the air flow to be front exhaust, rear exhaust, top exhaust with a front entry or top exhaust with a bottom entry
Contains two exhaust ports should the hot air need to be directed to the outside
Optional exhaust hose kit for use in directing the air to the outside
Specifications
Carton weight: 9 lbs (4.1 kg) Configuration: Three 3.75" thermal sensing fans that can be configured to intake or exhaust 12 volt trigger: Selectable Thermal Switch:The three fans can activate at two different ambient room temperatures Synch switch: Allows two units to operate at similar speeds Pig-Tail remote temp. sensor: Governs fan speed from the “hot spot” of the installation Optional exhaust hose kit: Allows hot air to be drawn from the installation to an alternative location Chassis Dimensions: 15.7" W x 8.75" D x 2.25" H (400mm x 222mm x 57mm) Rack mount panel dimensions: 19"W x 3.75"H (attaches to front panel of fan chassis) (483mm x 95mm)
Browse Products 
