Re:Source M51 I/O module

Re:Source M51 I/O module

Up to four external analogue audio sources can be connected using this module. One of the inputs can even be configured for a record deck whilst another can be used as a tape input. The signal from the source that is currently being played or that from another source, can be sent to the audio output. Up to two of these modules can be integrated into Re:system M51 source management.

The module's inputs can be individually named in the Re:system M51 source management Setup so that instead of an anonymously named AUX2, you can enter something useful like SAT-Rec. or VCR or Playstation, for example. The input signal for each of these inputs can be equalised so that the volume doesn't have to be adjusted when switching between different sources.

Inputs AUX 1 (Line) 500mV/10 kOhm AUX 1 (Configurable as Phono MM) 5 mV/47kOhm/100pF AUX 1 (Configurable as Phono MC) 500mV/10kOhm AUX 1 (Line), Record In 500mV/10kOhm Output Record Out 2.0V/470Ohm (based on Digital 0) Unweighted signal-to-noise ratio AUX 1-3, Record In 92dBA / 0.5 V Phono MM 78dBA / 5mV Phono MC 75dBA / 0.5mV Channel separation 80dB

The I/O module offers 4 analogue audio inputs (AUX1-AUX3 + REC-IN) and one record output. A maximum of 2 I/O modules can be operated in one M51.
Note: If two I/Os are in use, both REC-OUT carry the same signal

You may also be interested in this/these product(s):

Re:System M51 Standard Analogue System

Re:System M51 Basis Analogue System

Re:System M51 Standard Digital System

Re:System M51 Basis Digital System